ELRA Industries Inc.

---

Shower Shield®

1. After the shield is on over the protected area, firmly pull out all excess plastic.

2. Hold plastic firmly against leg or arm with finger while wrapping with excess plastic.

3. Fold excess plastic neatly over and hold against leg or arm.

4. Pull strap snugly around entire leg or arm. (Do not twist strap).

5. Fasten white tab to strap.

6. Attach one end of rubber sealer to strap so rubber is half on plastic and half on skin.

7. Wrap rubber sealer around leg or arm with some stretch to make sure a good seal is made.

8. Continue to wrap and stretch rubber sealer over itself until it is all used and the press down end tab to lock in place.

After use hang up the Shower Shield and rubber strap and let dry. Reuse as many times as needed.

CAUTION: Do not over tighten. This may/will restrict circulation to your arm or leg.

CAUTION: Plastic film coming in contact with a wet smooth surface may produce a slippery condition. Use extreme caution when using the Shower Shield product.

Graphic Instructions